Hisense U8Q vs Hisense E7Q / E79Q

When it comes to HDR, the Hisense U8Q shows its claws. On paper, meaning in synthetic measurement tests, the TV can "push out" nearly 4000 nits of peak brightness. This is a value that most models can only envy. In practice, this translates to very strong light effects in movies – in some scenes we managed to measure real levels from 1500 to 2000 nits, which is a level usually reserved for the absolute top-tier TVs on the market.

Of course, it's not always so perfect. In small, point-like elements, brightness can drop – a good example is scene number 4 from the movie Sicario 2, where instead of thousands of nits we get about 500. But it's worth noting that the effect doesn't disappear completely – the light is still visible, and the image doesn't appear artificially dimmed. This is a typical issue with Mini LEDs, so it’s hard to consider it a major drawback.

However, a huge plus has to be granted for colour reproduction. Thanks to additional coatings improving colour saturation, the U8Q almost covers the entire DCI-P3 colour space (98%), and for the wider BT.2020 gamut it achieved over 80%. This is an excellent result that makes HDR films look juicy, intense, and just very cinematic.

Hisense E7Q / E79Q is a mid-brightness TV, with a peak luminance level of around 350-380 nits. This is the absolute minimum that allows viewing HDR content in a way that's close to the creators' intentions, though without a distinct "wow" effect. The results of synthetic tests on white test patterns were confirmed in practice – in movie scenes, the bright parts of the image are stable and fairly even, but it's hard to talk about a true "burst of light" here. In everyday use, such as when watching Netflix or YouTube, the HDR effect is acceptable and is more than sufficient for most users. However, it must be said clearly – this is not the level of top-end screens, and one shouldn't expect that at this price. Fortunately, the Hisense E7Q / E79Q has an advantage that allows it to score quite a few points: it's a QLED panel of the PFS LED type, using an additional phosphor layer that improves colour reproduction. The measured range of the DCI-P3 colour gamut is around 92%, which means that the colours in most scenes are vibrant, well-saturated, and pleasing to the eye, especially for this price bracket.

We have to admit that when the U8Q arrived in our editorial office, we were slightly surprised… and in a good way. Usually, white balance in televisions immediately requires adjustment – it can be too warm or too cold, which immediately causes strange colour errors. Meanwhile, here the situation looks really good straight out of the box. Of course, we’re talking about our unit, so there’s no guarantee that every model will be tuned as well, but in our case, the first impressions were very positive. The only more noticeable issue was related to how the television manages brightness. Looking at the EOTF chart, it’s clear that the U8Q tends to brighten small elements on the screen. This, in turn, caused what we mentioned earlier – slight overexposure and the impression that the whole scene is a bit too bright. However, this is not a flaw that negates the picture, rather an effect characteristic of this model.

In Filmmaker mode, the Hisense E7Q / E79Q television really managed to impress. After the first measurements, it turned out that the white balance was quite well tuned, with the only minor deviation being a slight tendency towards a purple hue, which we mentioned earlier. However, this did not significantly impact the overall character of the image – it remained cohesive and pleasant to view. A much bigger issue was the brightness characteristics (gamma) in SDR content and the EOTF curve in HDR films. The television clearly brightened the image, flattening contrast and taking away depth. Gamma values could drop from the reference 2.4 down to around 1.9, making the image look as though it was covered with a thin, milky layer. Fortunately, this is a problem that can be relatively easily corrected through calibration.

Of course, we wouldn’t be ourselves if we didn’t make adjustments to the white balance. After calibration, we managed to level the SDR signal to near perfection – older films, YouTube content, and classic television looked nearly ideal on the U8Q. It’s truly an impressive level that shows this model can do a lot if given a bit of help. Unfortunately, the situation is different with HDR content. The colours themselves don’t pose much of a problem, but the biggest issue with the U8Q remains the EOTF brightness characteristics. In practice, the television tends to "shoot" above how the image should originally look. It’s this slight "blowout" we noticed earlier in comparisons with the best screens on the market. It’s a bit of a shame that this characteristic can't be completely tamed – if we could maintain equally good brightness control in HDR as we do in SDR, we would be looking at an absolutely reference-level image.

The biggest beneficiary of calibration in the case of the Hisense E7Q / E79Q was undoubtedly the SDR mode. It managed to achieve almost perfect image quality – most of the errors in the Color Checker test dropped below a value of 3, and often even 2, which is a remarkable result for this class of equipment. The biggest improvement came from aligning the brightness characteristic (gamma), which made the image no longer look blown out and regained natural depth. In HDR content, it was also possible to improve the colours and eliminate the purple tint that we mentioned earlier, but errors in the Color Checker measurements were still noticeable. This is due to the fact that – as is often the case with Hisense televisions – the screen manipulates brightness quite strongly, overexposing some colours. This was also indicated by the EOTF curve, which was slightly above the reference values, suggesting these minor issues with excessive brightening. Despite this flaw and the construction limitations that arise with HDR content, the Hisense E7Q / E79Q gained quite a bit after calibration. In everyday use, the television presents a coherent, natural, and pleasant-to-the-eye image, and the difference compared to the factory settings is indeed huge.

Hisense U8Q handles lower quality materials quite well. The television can smooth tonal transitions thanks to the “Smooth and Gradient Picture” feature – it works best on the Medium setting. It nicely dims unwanted bands and irregularities in the image, but importantly, it doesn't remove the film grain or fine details.

The upscaling itself is also at a good level. Image from lower resolutions appears smooth and soft, sometimes a bit too much – we get a plastic effect that may not appeal to everyone. Fortunately, this can be easily corrected with the sharpness slider, allowing you to adjust the image to your personal preferences.

In the case of Hisense E7Q / E79Q, upscaling and digital image processing are not the strongest points of this television. It is evident that the manufacturer has opted for simplicity rather than advanced image processing algorithms. The television does not offer any features that smooth tonal transitions or systems that enhance image clarity, which makes lower resolution materials look quite raw. Subtle compression edges can be seen on the screen, which better processors in other models can effectively hide.

During the testing of HD materials, we noticed that the E7Q tries to artificially boost detail, which sometimes works and other times has the opposite effect – the image becomes soft, slightly blurred, and at times even "watery." There is no aggressive sharpening that ruins naturalness, but there is also a lack of finesse in detail integration that better image processors provide.

Hisense U8Q has a panel that can refresh the image up to 165 Hz in 4K resolution. In practice, this will mainly benefit PC gamers, but as they say – better to have it than not 😊. For movies and series, we have a built-in smoother called Ultra Motion Smoothing. In the settings, it can be easily adjusted to your own preferences – whether you want a more ‘cinematic’ frame rate or a smooth, theatrical spectacle.

Hisense E7Q / E79Q is a television with a 60 Hz screen, so sports fans in 4K may feel a slight disappointment – you simply won’t see such smooth images here as in more expensive models with higher refresh rates. Fortunately, when it comes to movies, the situation is much better. Cinematic materials recorded at 24 frames per second can be displayed here using a motion smoothing feature, allowing the user to adjust the picture to their own preferences – more cinematic with visible frames or smoother, in a theatrical style.

In terms of features, the Hisense U8Q has practically everything one would expect from a modern gaming television. Thanks to the new processor, the manufacturer has managed to implement three HDMI 2.1 ports, so there’s no trouble connecting multiple consoles or a computer. On top of that, it includes all the key technologies – Game Bar with parameter previews, variable refresh rate (VRR), automatic game mode (ALLM)… in a word, a complete set.

But as often happens with Hisense, it’s missing just a bit from perfection. The biggest drawback remains the lack of support for the HGiG format, which allows the TV's brightness to be adjusted to the console and gets the most out of HDR in games. It’s a shame because if this feature were included, we’d have a device practically made for gamers. As it stands, the U8Q remains “only” a very good choice 😉

Hisense E7Q / E79Q is a really good TV for gamers, even though it doesn’t support 4K signal at 120 Hz. However, the manufacturer has included a set of features that until recently could only be found in more expensive models. There's ALLM, which is auto-switching to low latency mode, allowing the TV to activate game mode with very low input lag automatically. We also have VRR, working up to 60 Hz – while this may not look impressive on paper, in practice it is fully sufficient, as most console games don’t exceed this limit anyway. All these settings can be quickly found in the Game Bar panel, a convenient menu created specifically for gamers. From this level, you can change picture modes, turn on a frame counter, or even… an on-screen crosshair – in the Vidaa system amusingly called a “target point,” which is the result of a clumsy translation from the Chinese manufacturer.

Special praise should go to the ability to play in 1080p at 120 Hz, which significantly improves the fluidity and responsiveness of the image. This means that if someone wants to play a few titles at a higher refresh rate, they can simply lower the resolution and enjoy much smoother motion. Despite the lack of 4K@120Hz, the Hisense E7Q / E79Q really performs well as a gaming TV – especially for those who aren’t looking for perfection but a solid and fast screen for everyday gaming.